Uluhlu lwexabiso le-Uv Photosensitive Dry Film-Film eyomileyo eFakelwe kwiFPC nakwiPCB-Lucky Innovative

Uluhlu lwexabiso le-Uv Photosensitive Dry Film-Film eyomileyo eFakelwe kwi-FPC nakwi-PCB-Umfanekiso weThamsanqa oFanelweyo

Uluhlu lwexabiso le-Uv Photosensitive Dry Film-Film eyomileyo eFakelwe kwiFPC nakwiPCB-Lucky Innovative

Inkcazelo emfutshane:

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ividiyo ehambelanayo

Ingxelo (2)

Ngoku sinezakhono, iqela lokusebenza ukunika inkxaso ebalaseleyo kubathengi bethu. Sidla ngokulandela itenet yomthengi, ejolise kwiinkcukachaIsikali,Ifilim yoVavanyo loyilo lokunyathela iTire,IPhepha loxinzelelo, Ifemu yethu yakhula ngokukhawuleza ngobukhulu kunye nodumo ngenxa yokuzinikela kwayo ngokupheleleyo kwimveliso ekumgangatho ophezulu, ixabiso elikhulu lezisombululo kunye neenkonzo ezimangalisayo zabathengi.

Uluhlu lweXabiso le-Uv Photosensitive Dry Film-Film eyomileyo eFakelwe kwi-FPC nakwi-PCB-iNgcaciso yeThamsanqa:

Isicelo seMveliso

Kufakwe isicelo kwiBhodi yeSekethe eShicileleyo kunye neFlexible Printed Circuit Board, ngenzuzo yokusebenza kakuhle kokuthenda, ukusonjululwa kunye nokubambelela.

Ulwakhiwo lweMveliso

Ifilimu eyomileyo

Ukucaciswa kweMveliso

Ikhowudi yeMveliso	Ifilimu eyomileyo ye-LK-D1238 LDI	LK-G1038 ifilimu eyomileyo
Ukutyeba (μm)	38.0±2.0
Ubude (m)	200ｍ
Ububanzi	Ngokwesicelo sabathengi

Iiparamitha zeMveliso

(1) LK-D1238 LDI ifilimu eyomileyo

I-LK-D1238 LDI Ifilimu eyomileyo ifanelekile kumatshini wokubonisa umfanekiso othe ngqo, kunye ne-wavelength zombini i-355nm kunye ne-405nm.

Into kunye nendlela yoVavanyo			Idatha yoVavanyo
Elona xesha lifutshane lomfanekiso (1.0wt.% Na2CO3 isisombululo samanzi, 30℃) *2			25s
Ubude bamaza (nm)			355	405
Ukusebenza emva koMfanekiso	Ukubonakala kwefoto (*2×2.0)	ST=7/21 Amandla esisityhilelo*3	20mJ/cm2	15mJ/cm2
	Isisombululo(*2×2.0)	ST=6/21	40μm	40μm
		ST=7/21	40μm	40μm
		ST=8/21	50μm	50μm
	Ukuncamathela(*2×2.0)	ST=6/21	50μm	50μm
		ST=7/21	40μm	40μm
		ST=8/21	35μm	35μm
	【Ukuthembeka kokuThengisa】3 imingxuma eyi-10 (6mmφ) Ireyithi yokuqhawuka komngxuma (2×2.0×3 amaxesha)	ST=6/21	0%	0%
		ST=7/21	0%	0%
		ST=8/21	0%	0%
Ixesha lokuphela kwexesha (3.0wt.%NaOH isisombululo samanzi, 50℃)		ST=7/21* 1 Amandla okuvezwa	50s	50s

(2) LK-G1038 ifilimu eyomileyo

I-LK-G1038 Ifilimu eyomileyo ifanelekile ukuqhagamshelana nomatshini wokuvezwa, kunye nobude obuphambili be-365nm.

Into kunye nendlela yoVavanyo			Idatha yoVavanyo
Elona xesha lifutshane lomfanekiso (1.0wt.% Na2CO3 isisombululo samanzi, 30℃) *2			22s
Ukusebenza emva koMfanekiso	Ukubonakala kwefoto (*2×2.0)	ST=8/21 Amandla esisityhilelo*3	90mJ/cm2
	Isigqibo (*2×2.0)	ST=6/21	32.5μm
		ST=7/21*1	32.5μm
		ST=8/21	35μm
	Ukuncamathela (*2×2.0)	ST=6/21	45μm
		ST=7/21	40μm
		ST=8/21	35μm
	(Tending Reliability)3 imingxuma eyi-10 (6mmφ) Ireyithi yokuqhawuka komngxuma (2×2.0×3 amaxesha)	ST=6/21	0%
		ST=7/21	0%
		ST=8/21	0%
Ixesha lokuphela kwexesha (3.0wt.%NaOHwater isisombululo, 50℃)		ST=7/21*1 Amandla okuvezwa	50s

(Le datha ingentla yeyoreferensi kuphela)
Phawula:

*1: Stouffer 21 Stage Exposure Energy Scale.
*2 × 2.0: Umfanekiso onexesha eliphindwe kabini lelona xesha lifutshane lokucinga.
*3: Ukuba ugxininise kwi-Tending Reliability, kucetyiswa ukuba kusetyenziswe ixabiso le-exposure energy ye-7 ~ 8 isigaba.
*4: Le datha ingentla ivavanywa zizixhobo zethu kunye nezixhobo.

Inkqubo yesicelo

imveliso

Isilumkiso Kwisicelo

(1) Isicelo : Sebenzisa le filimu kuphela njengokumelana nezinto ezinxulumene nebhodi yesekethe eprintiweyo kunye nolunye uhlobo lwepateni.
(2) Unyango lwangaphambili : Iintsalela ze-Organic, amabala ngenxa yokungonelanga kwamanzi kunye nokomisa kwindawo yobhedu, kunokubangela i-polymerization yokumelana kunye nokungena kwe-plating okanye isisombululo se-etching.Nceda usule ngokupheleleyo emva kokuhlanjululwa kwamanzi. Ngokukodwa, xa ukufuma kuhlala ngaphakathi kumngxuma odlulayo, kubangela ukuba intente iqhekezwe.
(3) I-substrate preheating : Ukufudumala kwiqondo lokushisa eliphezulu kakhulu ixesha elide kunokubangela umhlwa. Kufuneka kwenziwe ngaphantsi kwe-10 min kwi-80 ℃ kwaye ngaphantsi kwe-3 min kwi-150 ℃. Kwaye xa iqondo lobushushu bomphezulu wesubstrate phambi kokuba i-lamination ingaphezulu kwe-70℃, ubukhulu befilimu kumphetho womngxuma bungabhitya kakhulu kwaye kunokubangela ukwaphuka kwentente.
(4) Ukubamba emva kwe-lamination kunye nokuvezwa : Bamba ngekhaka lokukhanya okanye phantsi kwesibane esityheli (iimitha ezi-2 okanye umgama ongaphezulu ofunekayo). Ixesha elide lokubamba kwimeko yokugqibela (phantsi kwesibane esiphuzi) ziintsuku ezi-4. Ukuvezwa kufuneka kwenziwe kwiintsuku ezi-4 emva kokulahlwa.Uphuhliso kufuneka lwenziwe phakathi kweentsuku ezi-3 emva kokuvezwa. Imitha yesibane esimhlophe esingeso-ultraviolet inemitha ye-ultraviolet, ngoko bamba ngesibane esikhanyayo ngeshiti elimnyama phantsi kwayo.Gcina ubushushu obungama-23±2℃ kunye nokufuma okunxulumene ne-60±10%RH. I-substrates ene-laminated kufuneka ifakwe kwi-rack nganye nganye.
(5) Uphuhliso: Xa ubushushu bomphuhlisi bungaphezulu kwe-35 ℃, inokwenza ukumelana neprofayili ibe mandundu.
(6) Ukuhluba : Ukuhluba kwisithuba seveki enye emva kokulanyiswa.
(7) Ukuphathwa kwenkunkuma : Amacandelo efilimu eyomileyo kumphuhlisi kunye ne-stripper inokudityaniswa ngokungathathi hlangothi. Amacandelo adibeneyo anokwahlulwa kwisisombululo samanzi ngokucofa indlela yokucoca kunye nendlela ye-centrifugal. Isisombululo samanzi esahlukileyo sinexabiso elithile le-COD kunye ne-BOD, ngoko ke kufuneka ukuba inkunkuma-inkunkuma iphathwe ngendlela efanelekileyo.
(8) Umbala wefilimu : Umbala uluhlaza/bhlowu. Nangona umbala unokujika ngokuthe ngcembe ngokuhamba kwexesha, akufuneki ukuba uphembelele uphawu.

Isilumkiso kuGcino

(1) Xa ugcino lusenziwa kwindawo emnyama, epholileyo, neyomileyo kumaqondo obushushu obuyi-5℃20℃ kunye nokufuma okungama-60% RH okanye ngaphantsi, ifilimu eyomileyo kufuneka isetyenziswe kwiintsuku ezingama-50 emva kokwenziwa.
(2) Gcina imiqulu yefilimu ngokuthe tye ngokusebenzisa iiracks okanye iibhodi zokuxhasa ukugcinwa. Xa zibekwe ngokuthe nkqo, amashiti efilimu eyomileyo asenokutyibilika nganye nganye kwaye ukumila kwawo kusenokufana nehlumelo loqalo (imiqulu ibekwe phantsi ngokuthe tye kwiphakheji).
(3) Khupha imiqulu yefilimu kwiphepha elimnyama phantsi kwesibane esityheli okanye uhlobo olufanayo lwesibane sokhuseleko. Ungazishiyi phantsi kwesibane esityheli ixesha elide. Gubungela imiqulu yefilimu ngephepha elimnyama xa uzigcina ixesha elide.

Imifanekiso yeenkcukacha zemveliso:

IsiKhokelo seMveliso esiNxulumeneyo:

Siqhubeka nomgaqo osisiseko "womgangatho wokuqala, ukuxhasa kuqala, uphuculo oluqhubekayo kunye nokwenziwa kwezinto ezintsha ukuhlangabezana nabathengi" kulawulo lwakho kunye "neziphene zero, izikhalazo zero" njengenjongo yomgangatho. Ukwenza inkonzo yethu ibe ntle, sinikezela ngezinto ezinomgangatho ophezulu ophezulu ngexabiso lokuthengisa elifanelekileyo le-PriceList ye-Uv Photosensitive Dry Film - Dry Film Applied On FPC And PCB - Lucky Innovative , Imveliso iya kubonelela kulo lonke ihlabathi, njenge: Slovakia , Leicester , San Francisco , Ukuze ukwazi ukusebenzisa i-infox kwi-intanethi evela kumazwe ngamazwe kwaye wamkelekile kwi-intanethi evela kumazwe ngamazwe. ngaphandle kweintanethi. Nangona kukho izisombululo ezisemgangathweni esizinikezelayo, inkonzo yothethwano esebenzayo neyanelisayo inikezelwa liqela lethu lenkonzo yeengcali emva kokuthengisa. Uluhlu lweemveliso kunye neeparamitha ezineenkcukacha kunye naluphi na olunye ulwazi lwe-weil luthunyelwa kuwe ngexesha elifanelekileyo malunga nemibuzo yakho. Ke nceda uqhagamshelane nathi ngokusithumela ii-imeyile okanye usitsalele umnxeba ukuba unayo nayiphi na imibuzo malunga nombutho wethu. Unokufumana ulwazi lwedilesi yethu kwiphepha lethu lewebhu kwaye uze kwinkampani yethu ukuze ufumane uphononongo lwentengiso yethu. Siqinisekile ukuba siza kwabelana ngokuzuzileyo kunye nokudala ubudlelwane obuluqilima bentsebenziswano namaqabane ethu kule ndawo yentengiso. Sikhangela phambili kwimibuzo yakho.

I-Dry Film Photoresist

Ldi Dry Film

Ifilimu eyomileyo yePcb

Pcb ephathekayo Photosensitive Dry Film

Umboniso bhanyabhanya weMveliso yeSekethe yePhotosensitive

Photosensitive Dry Film

Ifilimu enezithombe

I-Photosensitive Film Pcb

Ifilimu eyomileyo ebuthathaka

Uv Photosensitive Dry Film

Umthengisi athobele ithiyori "yomgangatho osisiseko, ithemba lokuqala kunye nolawulo oluphambili" ukuze baqinisekise umgangatho wemveliso othembekileyo kunye nabathengi abazinzile.
Iinkwenkwezi ezi-5