IFactory eshibhile eshushu iFilimu eyomileyo eyomileyo-iFilimu eyomileyo eFakwe kwiFPC nakwiPCB-Lucky Innovative

Inkcazelo emfutshane:

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ividiyo ehambelanayo

Ingxelo (2)

Inkampani yethu ukusukela oko yaqalayo, ihlala ijonga imveliso okanye inkonzo ekumgangatho ophezulu njengobomi beshishini, iqhubeka iphucula itekhnoloji yokudala, yenza uphuculo kwimveliso ekumgangatho ophezulu kwaye ngokuqhubekayo isomeleza ulawulo oluphezulu lweshishini, ngokuhambelana ngokungqongqo kunye nomgangatho wesizwe we-ISO 9001:2000Ifilim elukiweyo yeGrain Auto Ins Decoration,I-Copper Tape Emi Shielding,Ifilimu yangaphakathi yemoto, Simi ngxi namhlanje yaye sikhangela ixesha elide, sibamkela ngokunyanisekileyo abathengi abasehlabathini lonke ukuba basebenzisane nathi.

Umzi-mveliso oshibhile oshushu weefoto bhanyabhanya owomileyo-iFilimu eyomileyo eFakwe kwi-FPC nakwi-PCB-iNgcaciso yeThamsanqa:

Isicelo seMveliso

Kufakwe isicelo kwiBhodi yeSekethe eShicileleyo kunye neFlexible Printed Circuit Board, ngenzuzo yokusebenza kakuhle kokuthenda, ukusonjululwa kunye nokubambelela.

Ulwakhiwo lweMveliso

Ifilimu eyomileyo

Ukucaciswa kweMveliso

Ikhowudi yeMveliso	I-LK-D1238 LDIIfilimu eyomileyo	LK-G1038 ifilimu eyomileyo
Ukutyeba (μm)	38.0±2.0
Ubude (m)	200ｍ
Ububanzi	Ngokwesicelo sabathengi

Iiparamitha zeMveliso

(1) LK-D1238 LDI ifilimu eyomileyo

I-LK-D1238 LDI Ifilimu eyomileyo ifanelekile kumatshini wokubonisa umfanekiso othe ngqo, kunye ne-wavelength zombini i-355nm kunye ne-405nm.

Into kunye nendlela yoVavanyo			Idatha yoVavanyo
Elona xesha lifutshane lomfanekiso (1.0wt.% Na2CO3 isisombululo samanzi, 30℃) *2			25s
Ubude bamaza (nm)			355	405
Ukusebenza emva koMfanekiso	Ukubonakala kwefoto (*2×2.0)	ST=7/21 Amandla esisityhilelo*3	20mJ/cm2	15mJ/cm2
	Isisombululo(*2×2.0)	ST=6/21	40μm	40μm
		ST=7/21	40μm	40μm
		ST=8/21	50μm	50μm
	Ukuncamathela(*2×2.0)	ST=6/21	50μm	50μm
		ST=7/21	40μm	40μm
		ST=8/21	35μm	35μm
	【Ukuthembeka kokuThengisa】3 imingxuma eyi-10 (6mmφ) Ireyithi yokuqhawuka komngxuma (2×2.0×3 amaxesha)	ST=6/21	0%	0%
		ST=7/21	0%	0%
		ST=8/21	0%	0%
Ixesha lokuphela kwexesha (3.0wt.%NaOH isisombululo samanzi, 50℃)		ST=7/21* 1 Amandla okuvezwa	50s	50s

(2) LK-G1038 ifilimu eyomileyo

I-LK-G1038 Ifilimu eyomileyo ifanelekile ukuqhagamshelana nomatshini wokuvezwa, kunye nobude obuphambili be-365nm.

Into kunye nendlela yoVavanyo			Idatha yoVavanyo
Elona xesha lifutshane lomfanekiso (1.0wt.% Na2CO3 isisombululo samanzi, 30℃) *2			22s
Ukusebenza emva koMfanekiso	Ukubonakala kwefoto (*2×2.0)	ST=8/21 Amandla esisityhilelo*3	90mJ/cm2
	Isigqibo (*2×2.0)	ST=6/21	32.5μm
		ST=7/21*1	32.5μm
		ST=8/21	35μm
	Ukuncamathela (*2×2.0)	ST=6/21	45μm
		ST=7/21	40μm
		ST=8/21	35μm
	(Tending Reliability)3 imingxuma eyi-10 (6mmφ) Ireyithi yokuqhawuka komngxuma (2×2.0×3 amaxesha)	ST=6/21	0%
		ST=7/21	0%
		ST=8/21	0%
Ixesha lokuphela kwexesha (3.0wt.%NaOHwater isisombululo, 50℃)		ST=7/21*1 Amandla okuvezwa	50s

(Le datha ingentla yeyoreferensi kuphela)
Phawula:

*1: Stouffer 21 Stage Exposure Energy Scale.
*2 × 2.0: Umfanekiso onexesha eliphindwe kabini lelona xesha lifutshane lokucinga.
*3: Ukuba ugxininise kwi-Tending Reliability, kucetyiswa ukuba kusetyenziswe ixabiso le-exposure energy ye-7 ~ 8 isigaba.
*4: Le datha ingentla ivavanywa zizixhobo zethu kunye nezixhobo.

Inkqubo yesicelo

imveliso

Isilumkiso Kwisicelo

(1) Isicelo : Sebenzisa le filimu kuphela njengokumelana nezinto ezinxulumene nebhodi yesekethe eprintiweyo kunye nolunye uhlobo lwepateni.
(2) Unyango lwangaphambili : Iintsalela ze-Organic, amabala ngenxa yokungonelanga kwamanzi kunye nokomisa kwindawo yobhedu, kunokubangela i-polymerization yokumelana kunye nokungena kwe-plating okanye isisombululo se-etching.Nceda usule ngokupheleleyo emva kokuhlanjululwa kwamanzi. Ngokukodwa, xa ukufuma kuhlala ngaphakathi kumngxuma odlulayo, kubangela ukuba intente iqhekezwe.
(3) I-substrate preheating : Ukufudumala kwiqondo lokushisa eliphezulu kakhulu ixesha elide kunokubangela umhlwa. Kufuneka kwenziwe ngaphantsi kwe-10 min kwi-80 ℃ kwaye ngaphantsi kwe-3 min kwi-150 ℃. Kwaye xa iqondo lobushushu bomphezulu wesubstrate phambi kokuba i-lamination ingaphezulu kwe-70℃, ubukhulu befilimu kumphetho womngxuma bungabhitya kakhulu kwaye kunokubangela ukwaphuka kwentente.
(4) Ukubamba emva kwe-lamination kunye nokuvezwa : Bamba ngekhaka lokukhanya okanye phantsi kwesibane esityheli (iimitha ezi-2 okanye umgama ongaphezulu ofunekayo). Ixesha elide lokubamba kwimeko yokugqibela (phantsi kwesibane esiphuzi) ziintsuku ezi-4. Ukuvezwa kufuneka kwenziwe kwiintsuku ezi-4 emva kokulahlwa.Uphuhliso kufuneka lwenziwe phakathi kweentsuku ezi-3 emva kokuvezwa. Imitha yesibane esimhlophe esingeso-ultraviolet inemitha ye-ultraviolet, ngoko bamba ngesibane esikhanyayo ngeshiti elimnyama phantsi kwayo.Gcina ubushushu obungama-23±2℃ kunye nokufuma okunxulumene ne-60±10%RH. I-substrates ene-laminated kufuneka ifakwe kwi-rack nganye nganye.
(5) Uphuhliso: Xa ubushushu bomphuhlisi bungaphezulu kwe-35 ℃, inokwenza ukumelana neprofayili ibe mandundu.
(6) Ukuhluba : Ukuhluba kwisithuba seveki enye emva kokulanyiswa.
(7) Ukuphathwa kwenkunkuma : Amacandelo efilimu eyomileyo kumphuhlisi kunye ne-stripper inokudityaniswa ngokungathathi hlangothi. Amacandelo adibeneyo anokwahlulwa kwisisombululo samanzi ngokucofa indlela yokucoca kunye nendlela ye-centrifugal. Isisombululo samanzi esahlukileyo sinexabiso elithile le-COD kunye ne-BOD, ngoko ke kufuneka ukuba inkunkuma-inkunkuma iphathwe ngendlela efanelekileyo.
(8) Umbala wefilimu : Umbala uluhlaza/bhlowu. Nangona umbala unokujika ngokuthe ngcembe ngokuhamba kwexesha, akufuneki ukuba uphembelele uphawu.

Isilumkiso kuGcino

(1) Xa ugcino lusenziwa kwindawo emnyama, epholileyo, neyomileyo kumaqondo obushushu obuyi-5℃20℃ kunye nokufuma okungama-60% RH okanye ngaphantsi, ifilimu eyomileyo kufuneka isetyenziswe kwiintsuku ezingama-50 emva kokwenziwa.
(2) Gcina imiqulu yefilimu ngokuthe tye ngokusebenzisa iiracks okanye iibhodi zokuxhasa ukugcinwa. Xa zibekwe ngokuthe nkqo, amashiti efilimu eyomileyo asenokutyibilika nganye nganye kwaye ukumila kwawo kusenokufana nehlumelo loqalo (imiqulu ibekwe phantsi ngokuthe tye kwiphakheji).
(3) Khupha imiqulu yefilimu kwiphepha elimnyama phantsi kwesibane esityheli okanye uhlobo olufanayo lwesibane sokhuseleko. Ungazishiyi phantsi kwesibane esityheli ixesha elide. Gubungela imiqulu yefilimu ngephepha elimnyama xa uzigcina ixesha elide.

Imifanekiso yeenkcukacha zemveliso:

IsiKhokelo seMveliso esiNxulumeneyo:

Ngoku mhlawumbi sinezona zixhobo zintsha zokuvelisa, iinjineli ezinamava kunye nabaqeqeshiweyo kunye nabasebenzi, zithathelwe ingqalelo iinkqubo zolawulo olukumgangatho ophezulu kunye neqela lengeniso yengcali enobubele ngaphambi / emva kokuthengisa inkxaso yeFactory Cheap Hot Photosensitive Dry Film-Dry Film Applied On FPC kunye nePCB – Lucky Innovative , Imveliso iya kubonelela kwihlabathi liphela, njenge: Americas, Madras , isicelo sethu esihloniphekileyo, Mexico Inkonzo yodidi lokuqala, umgangatho ogqwesileyo, elona xabiso lilungileyo kunye nosuku lokuhanjiswa olukhawulezayo luncedo lwethu! Nika bonke abathengi inkonzo elungileyo ngumgaqo wethu! Oku kwenza inkampani yethu ifumane inkoliseko yabathengi kunye nenkxaso! Wamkelekile kwihlabathi jikelele abathengi basithumelela imibuzo kwaye sijonge phambili intsebenziswano yakho entle !Qinisekisa ukuba umbuzo wakho malunga neenkcukacha ezingaphezulu okanye isicelo sokuthengisa kwiindawo ezikhethiweyo.

Ifilimu eyomileyo

I-Dry Film Photoresist

Umphuhlisi owomileyo weFilimu Photoresist

Ukuxhathisa ifilimu eyomileyo

Ldi Dry Film

Ifilimu eyomileyo yePcb

Pcb Photosensitive Dry Film

Pcb ephathekayo Photosensitive Dry Film

Ephathekayo Photosensitive Dry Film

I-Positive Dry Film Photoresist

Uluhlu olubanzi, umgangatho olungileyo, amaxabiso afanelekileyo kunye nenkonzo elungileyo, izixhobo eziqhubela phambili, iitalente ezigqwesileyo kunye nemikhosi yetekhnoloji yomeleza ngokuqhubekayo, iqabane elihle leshishini.
Iinkwenkwezi ezi-5

NguChristopher Mabey waseBelize - 2018.10.09 19:07

Umzi-mveliso unokuhlangabezana ngokuqhubekayo nokuphuhlisa iimfuno zezoqoqosho kunye nezentengiso, ukuze iimveliso zabo ziqatshelwe kwaye zithembeke, kwaye yiyo loo nto sikhethe le nkampani.
Iinkwenkwezi ezi-5

NguFrances ovela eUkraine - 2018.12.14 15:26

Bhala umyalezo wakho apha kwaye uwuthumele kuthi