Ngo-2021 iFilimu eyomileyo yoMgangatho oLungileyo wePcb-iFilimu eyomileyo eFakelwe kwi-FPC nakwi-PCB-uLucky Innovative
Ngo-2021 iFilimu eyomileyo yoMgangatho oLungileyo wePcb-iFilimu eyomileyo eFakelwe kwi-FPC nakwi-PCB-uLucky Innovative
2021 Umgangatho olungileyo wePcb bhanyabhanya owomileyo-iFilimu eyomileyo eFakelwe kwi-FPC nakwi-PCB-iNgcaciso yeThamsanqa:
Isicelo seMveliso
Kufakwe isicelo kwiBhodi yeSekethe eShicileleyo kunye neFlexible Printed Circuit Board, ngenzuzo yokusebenza kakuhle kokuthenda, ukusonjululwa kunye nokubambelela.
Ulwakhiwo lweMveliso
Ukucaciswa kweMveliso
| Ikhowudi yeMveliso | Ifilimu eyomileyo ye-LK-D1238 LDI | LK-G1038 ifilimu eyomileyo |
| Ukutyeba (μm) | 38.0±2.0 | |
| Ubude (m) | 200ｍ | |
| Ububanzi | Ngokwesicelo sabathengi | |
Iiparamitha zeMveliso
(1) LK-D1238 LDI ifilimu eyomileyo
I-LK-D1238 LDI Ifilimu eyomileyo ifanelekile kumatshini wokubonisa umfanekiso othe ngqo, kunye ne-wavelength zombini i-355nm kunye ne-405nm.
| Into kunye nendlela yoVavanyo | Idatha yoVavanyo | |||
| Elona xesha lifutshane lomfanekiso (1.0wt.% Na2CO3 isisombululo samanzi, 30℃) *2 | 25s | |||
| Ubude bamaza (nm) | 355 | 405 | ||
| Ukusebenza emva koMfanekiso | Ukubonakala kwefoto (*2×2.0) | ST=7/21 Amandla esisityhilelo*3 | 20mJ/cm2 | 15mJ/cm2 |
| Isisombululo(*2×2.0) | ST=6/21 | 40μm | 40μm | |
| ST=7/21 | 40μm | 40μm | ||
| ST=8/21 | 50μm | 50μm | ||
| Ukuncamathela(*2×2.0) | ST=6/21 | 50μm | 50μm | |
| ST=7/21 | 40μm | 40μm | ||
| ST=8/21 | 35μm | 35μm | ||
| 【Ukuthembeka kokuThengisa】*3 imingxuma eyi-10 (6mmφ) Ireyithi yokuqhawuka komngxuma (*2×2.0×3 amaxesha) | ST=6/21 | 0% | 0% | |
| ST=7/21 | 0% | 0% | ||
| ST=8/21 | 0% | 0% | ||
| Ixesha lokuphela kwexesha (3.0wt.%NaOH isisombululo samanzi, 50℃) | ST=7/21* 1 Amandla okuvezwa | 50s | 50s | |
(2) LK-G1038 ifilimu eyomileyo
I-LK-G1038 Ifilimu eyomileyo ifanelekile ukuqhagamshelana nomatshini wokuvezwa, kunye nobude obuphambili be-365nm.
| Into kunye nendlela yoVavanyo | Idatha yoVavanyo | ||
| Elona xesha lifutshane lomfanekiso (1.0wt.% Na2CO3 isisombululo samanzi, 30℃) *2 | 22s | ||
| Ukusebenza emva koMfanekiso | Ukubonakala kwefoto (*2×2.0) | ST=8/21 Amandla esisityhilelo*3 | 90mJ/cm2 |
| Isigqibo (*2×2.0) | ST=6/21 | 32.5μm | |
| ST=7/21*1 | 32.5μm | ||
| ST=8/21 | 35μm | ||
| Ukuncamathela (*2×2.0) | ST=6/21 | 45μm | |
| ST=7/21 | 40μm | ||
| ST=8/21 | 35μm | ||
| (Tending Reliability)*3 imingxuma eyi-10 (6mmφ) Ireyithi yokuqhawuka komngxuma (*2×2.0×3 amaxesha) | ST=6/21 | 0% | |
| ST=7/21 | 0% | ||
| ST=8/21 | 0% | ||
| Ixesha lokuphela kwexesha (3.0wt.%NaOHwater isisombululo, 50℃) | ST=7/21*1 Amandla okuvezwa | 50s | |
(Le datha ingentla yeyoreferensi kuphela)
Phawula:
*1: Stouffer 21 Stage Exposure Energy Scale.
*2 × 2.0: Umfanekiso onexesha eliphindwe kabini lelona xesha lifutshane lokucinga.
*3: Ukuba ugxininise kwi-Tending Reliability, kucetyiswa ukuba kusetyenziswe ixabiso le-exposure energy ye-7 ~ 8 isigaba.
*4: Le datha ingentla ivavanywa zizixhobo zethu kunye nezixhobo.
Inkqubo yesicelo
Isilumkiso Kwisicelo
(1) Isicelo : Sebenzisa le filimu kuphela njengokumelana nezinto ezinxulumene nebhodi yesekethe eprintiweyo kunye nolunye uhlobo lwepateni.
(2) Unyango lwangaphambili : Iintsalela ze-Organic, amabala ngenxa yokungonelanga kwamanzi kunye nokomisa kwindawo yobhedu, kunokubangela i-polymerization yokumelana kunye nokungena kwe-plating okanye isisombululo se-etching.Nceda usule ngokupheleleyo emva kokuhlanjululwa kwamanzi. Ngokukodwa, xa ukufuma kuhlala ngaphakathi kumngxuma odlulayo, kubangela ukuba intente iqhekezwe.
(3) I-substrate preheating : Ukufudumala kwiqondo lokushisa eliphezulu kakhulu ixesha elide kunokubangela umhlwa. Kufuneka kwenziwe ngaphantsi kwe-10 min kwi-80 ℃ kwaye ngaphantsi kwe-3 min kwi-150 ℃. Kwaye xa iqondo lobushushu bomphezulu wesubstrate phambi kokuba i-lamination ingaphezulu kwe-70℃, ubukhulu befilimu kumphetho womngxuma bungabhitya kakhulu kwaye kunokubangela ukwaphuka kwentente.
(4) Ukubamba emva kwe-lamination kunye nokuvezwa : Bamba ngekhaka lokukhanya okanye phantsi kwesibane esityheli (iimitha ezi-2 okanye umgama ongaphezulu ofunekayo). Ixesha elide lokubamba kwimeko yokugqibela (phantsi kwesibane esiphuzi) ziintsuku ezi-4. Ukuvezwa kufuneka kwenziwe kwiintsuku ezi-4 emva kokulahlwa.Uphuhliso kufuneka lwenziwe phakathi kweentsuku ezi-3 emva kokuvezwa. Imitha yesibane esimhlophe esingeso-ultraviolet inemitha ye-ultraviolet, ngoko bamba ngesibane esikhanyayo ngeshiti elimnyama phantsi kwayo.Gcina ubushushu obungama-23±2℃ kunye nokufuma okunxulumene ne-60±10%RH. I-substrates ene-laminated kufuneka ifakwe kwi-rack nganye nganye.
(5) Uphuhliso: Xa ubushushu bomphuhlisi bungaphezulu kwe-35 ℃, inokwenza ukumelana neprofayili ibe mandundu.
(6) Ukuhluba : Ukuhluba kwisithuba seveki enye emva kokulanyiswa.
(7) Ukuphathwa kwenkunkuma : Amacandelo efilimu eyomileyo kumphuhlisi kunye ne-stripper inokudityaniswa ngokungathathi hlangothi. Amacandelo adibeneyo anokwahlulwa kwisisombululo samanzi ngokucofa indlela yokucoca kunye nendlela ye-centrifugal. Isisombululo samanzi esahlukileyo sinexabiso elithile le-COD kunye ne-BOD, ngoko ke kufuneka ukuba inkunkuma-inkunkuma iphathwe ngendlela efanelekileyo.
(8) Umbala wefilimu : Umbala uluhlaza/bhlowu. Nangona umbala unokujika ngokuthe ngcembe ngokuhamba kwexesha, akufuneki ukuba uphembelele uphawu.
Isilumkiso kuGcino
(1) Xa ugcino lusenziwa kwindawo emnyama, epholileyo, neyomileyo kumaqondo obushushu obuyi-5℃20℃ kunye nokufuma okungama-60% RH okanye ngaphantsi, ifilimu eyomileyo kufuneka isetyenziswe kwiintsuku ezingama-50 emva kokwenziwa.
(2) Gcina imiqulu yefilimu ngokuthe tye ngokusebenzisa iiracks okanye iibhodi zokuxhasa ukugcinwa. Xa zibekwe ngokuthe nkqo, amashiti efilimu eyomileyo asenokutyibilika nganye nganye kwaye ukumila kwawo kusenokufana nehlumelo loqalo (imiqulu ibekwe phantsi ngokuthe tye kwiphakheji).
(3) Khupha imiqulu yefilimu kwiphepha elimnyama phantsi kwesibane esityheli okanye uhlobo olufanayo lwesibane sokhuseleko. Ungazishiyi phantsi kwesibane esityheli ixesha elide. Gubungela imiqulu yefilimu ngephepha elimnyama xa uzigcina ixesha elide.
Imifanekiso yeenkcukacha zemveliso:
IsiKhokelo seMveliso esiNxulumeneyo:
Ukwaneliseka kwabathengi yeyona njongo yethu iphambili. Siphakamisa umgangatho ohambelanayo wobugcisa, umgangatho, ukuthembeka kunye nenkonzo ye-2021 Umgangatho Olungileyo wePcb Ifilimu eyomileyo - Ifilimu eyomileyo eFakelwe kwi-FPC kunye ne-PCB - Lucky Innovative , Imveliso iya kubonelela kuwo wonke umhlaba, njenge: Peru , San Francisco , Mozambique , Ukuba kukho nayiphi na into enomdla kuwe, nceda usazise. Siya kuzama konke okusemandleni ethu ukwanelisa iimfuno zakho ngeemveliso ezikumgangatho ophezulu, amaxabiso angcono kunye nokuhanjiswa okukhawulezayo. Nceda uzive ukhululekile ukuqhagamshelana nathi nangaliphi na ixesha. Siya kukuphendula xa sifumana imibuzo yakho. Nceda uqaphele ukuba iisampulu ziyafumaneka ngaphambi kokuba siqale ishishini lethu.
NguMary waseSwitzerland - 2018.02.12 14:52 Impahla esandula ukufunyanwa, saneliseke kakhulu, umboneleli olungileyo kakhulu, sinethemba lokwenza imizamo eqhubekayo yokwenza ngcono.
NguMarcie Green ovela eToronto - 2017.08.28 16:02 -
Uyilo oluHlaziywayo lweSibonisi soxinzelelo lweTactile...
-
Uluhlu lweXabiso lokuhombisa iMetal Auto Ins
-
ULuhlu lwamaxabiso atshiphu aMakhadi angenanto yaMagnetic Stripe...
-
OEM/ODM China Atm Magnetic - Magnetic Stripe B...
-
Intengiso eshushu elukiweyo yeGrain ye-Auto Ins yoMhlobiso weFilimu -...
-
Umzi-mveliso waMahala wesampulu yaMakhadi eMagnetic angenanto-Inv...